Rotonics Custom Molding

1.888.422.8683 info@snyderplasticsolutions.com

Products

Poly-Pad XT

YEPR03 Series

Description

The YEPR03 is manufactured from High Density Polyethylene and Compression Molded. Utility pads ave available in one popular size of 42” x 42” with a variety of cable openings.

  • Smooth top for mounting of transformers.
  • Grid underside for leveling, support, and stability.
  • Smooth top allows moisture to drain completely.
  • Remains under single (1ph) phase transformer loads.
  • Made from 100% recyclable HDPE Plastic Resin.

Cable Openings

YEPR031220 : 42" x 42" x 4" cable opening 12" x 20".
YEPRO31226 : 42" x 42" x 4" cable opening 12" x 26".
YEPR031226LC : 42" x 42" x 4" cable opening 12" x LC (Long Channel).


Transformer Pad Hardware

TEPR1T Pallet Pad

TEPR1T

Description

The TEPR utility pad can be used as a shipping pade and as a pad for field installation of the transformers. Fork pockets are stategically located to keep cables away from the pockets. The pad is rotationally molded using High Densisty Polyethylene.

Available Sizes

  • TEPR1TA – Micro Pad w/ steel for reinforcement: 41” x 24” x 4” cable opening 14” x 20”.
  • TEPRITZ – Micro Pad : 41” x 24” x 4” cable opening 14” x 20”.
  • TEPRW2CB3 – Micro Pad w/ steel reinforcement : 42” x 25” x 4” cable opening 10” x 16”.

Specs

Line Drawing
Transformer Pad Hardware

TEPR5 Closed Bottom Pad

TEPR

Back To Top

Description

Rotationally molding process forms closed bottom, stress free pads with Superior toughness, and excellent impact resisance.

  • High Densisity Polyethlyne (HDPE) Resin is 100% Recyclable-UV Stabilized and field tested for use in all types of soils.
  • Closed bottom pads.
  • Internal reinforcement.

Available Sizes

TEPR4 : 47" x 47" x 4" w/ cable opening 12" x 28"
TEPR5 : 42" x 54" x 4" w/ cable opening 12" x 20"


Transformer Pad Hardware

Transformer Pad Hardware

WH1

WH1

Channel with spring nut and hex bolt.

WH2

WH2

Channel with spring nut, hex bolt and one hole square washer.

WH3

WH3

Channel with spring nut, hex bolt and beam clamp.

WH6

WH6

Channel with spring nut, hex bolt and two hole bracket.

WHN1

WHN1

Channel with plastic
spring nut, hex bolt and 3 hole bracket.

WH7

WH7

Channel with spring nut, hex bolt and slotted bracket.